The media converter continuously monitors the100Base-X fiber connection for a valid signal. With Far-End Fault enabled the media converter transmits the Far-End Fault Indication over the 100Base-X fiber connection whenever a receive failure is detected on the 100Base-X fiber connection. The media converter implements the 802.3 standard for Far-End Fault for the indication and detection of remote fault conditions on the 100Base-X fiber connection. Should a fault occur, the end devices have the indication of a failure available to them making trouble shooting easier. Using Link Pass-Through with Far-End Fault minimizes data loss when a fault occurs. In addition if Far-End Fault is enabled the media converter can turn off the 10/100Base-TX transmitter when a FAR-End Fault is received.
With Link Pass-Through the state of the UTP receiver is passed to the fiber transmitter to make the media converter appear transparent to the end devices that are connected. With Auto-MDIX enabled, either a straight-through or crossover type cable can be used to connect the media converter to the device on the other end of the cable. The media converter supports auto negotiation on the 10/100Base-TX interface.Īuto-MDIX (automatic medium-dependant interface crossover) detects the signaling on the UTP interface to determine the type of cable connected (straight-through or crossover) and automatically configures the connection when enabled. Ideal for areas that may be exposed to vibration.
Included with all models, a strain relief strap is provided to ensure a solid and secure power connection to the media converter.
PoE+ models support both Type 1 ( PoE ) and Type 2 ( PoE+ ) PD gear Performs the Power Sourcing Equipment ( PSE ) function for IEEE 802.3af (15.4 watts PoE) and IEEE 802.3at ( up to 30 watts PoE+ ) compliant devices. Fast Ethernet Rate Converting to Fiber PoE Media Converter Features
Transitions media converter free#
These cost and time saving features, along with a lifetime warranty and free worldwide technical support, make Perle's Fast Ethernet rate converting PoE Media Converters the smart choice for IT professionals. This allows for more efficient troubleshooting and less on-site maintenance. Network Administrators can "see-everything" with Perle's advanced features such as Auto-Negotiation, Auto-MDIX, Link Pass-Through, Fiber Fault Alert, and Loopback. Perle 10/100 PoE Ethernet to Fiber Converters provide an economical path to extend the distance of an existing network with fiber cabling. At the same time they function as PoE injectors to power devices like IP phones, video conferencing equipment, IP cameras and Wi-Fi devices over copper UTP cabling. Perle has PoE media converter models that support the IEEE 802.3af PoE standard (15.4W of power) or the IEEE 802.3at PoE+ standard (30W of power). Learn more about PoE. Perle PoE Media Converters are classified as Power Sourcing Equipment (PSE). While using standard UTP cables that carry Ethernet data, Perle PoE media converters also provide power to Powered Devices (PDs). The pluggable fiber optics port allows for flexible network configurations using SFP transceivers supplied by Perle, Cisco or other manufacturers of MSA compliant SFPs. Over 40 models to choose from with either fixed fiber or SFP ports. S-110 PoE Media Converters are also available with support for Extended Temperature ranges. Perle's feature rich Fast Ethernet rate converting PoE Media Converters transparently connect copper to fiber while providing Power over Ethernet ( PoE ) to standards-based PoE and PoE+ compliant devices such as IP cameras, VoIP phones and wireless access points.
0 kommentar(er)
